Cloth Diaper Washing 101

Cloth Diaper Washing 101

Cloth Diaper Washing 101

Mother-ease Cloth Diaper Washing 101

Mother-ease Cloth Diaper Washing 101 Blog

Some of the most frequently posted questions online have to do with issues related to washing cloth diapers. To help, you have to understand the basics of laundering, which detergents to use, the correct dosage, and the wash and drying cycles.

Understanding the wash:

When washing cloth diapers you will follow the same process as your regular wash - there's nothing magic or mysterious about caring for your diapers as long as you have a good routine and a good detergent. For the best results, use a 10-minute pre-soak to loosen solids and relax the diaper fibers so they release solids and stains. Select your washers normal cycle and set the water temperature to hot. Add the detergent manufacturer's recommended amount of washing detergent then let the machine take care of the rest! When finished, dry your cloth diapers in a tumble dryer or on a clothesline.

Laundry Detergent

The root of almost every cloth diaper issue we see can be traced back to the laundry detergent. If you have soft or softened water, cleansing diapers are pretty easy because almost all detergents and wash potions work well in soft water. If you're one of the 90% who doesn't have soft water, it's really important that you find a detergent that works well for the water in your area. The harder your water, the more likely you'll need a big-brand detergent. 

Water Hardness

Dissolved magnesium and calcium are the primary minerals that make water hard (others include manganese, iron and mineral ions). These dissolved minerals interfere with the laundry detergents ability to clean and rinse, that's why detergents work better in soft water. If you're using the wrong type of detergent for your water, detergent residues will not rinse clean and hard water minerals will accumulate in your cloth diaper. Over time these minerals build up on fibers, restricting the absorbency and making the diaper progressively harder to clean. If your diapers get too much buildup, you have to 'strip' them of mineral and residue buildups, similar to using CLR to clean the crusty residue from around a drain or faucet. For more information, see stripping below.

Selecting Detergents

Detergents come in 2 basic types, those with surfactants and those with surfactants, chelating agents and/or builders. Boutique brands like Charlie's and Allen's are the first type and big-branded detergents like Tide and Cheer are the second type.

Surfactants are the part of the detergent that softens and releases soils from fabrics, all detergents have surfactants. In soft water, surfactants work great, but in hard water, the minerals act like dirt and use up the surfactants making them unavailable to clean the fabrics. To counteract the hard water minerals, big-branded detergent makers add chelating agents and/or builders to their formula. These ingredients soften the wash water so the minerals won't interfere with the surfactants. The effect is better cleaning, better rinsing, and fewer hard water mineral deposits in your diapers. 

Chelating agents and builders are complex and expensive to produce, that's why they are mostly in the big-brand detergents. Boutique detergent makers rely on the user to supply soft water. Unfortunately, they don't always print that on the label!

Since most of us have hard water, big-brand detergents with 'builders' will usually work better at cleansing and reducing mineral buildup. If your water is naturally soft or you have a water softener, the boutique detergents should work fine (you probably never have stripping problems anyway). If in doubt about what works best in your area, visit the biggest grocer in your area and ask which brand of detergent sells best - chances are the masses have already figured it out for you.

Once you decide on a detergent brand, choose the type that does not contain brighteners (oxygen bleach, sodium polycarbonate, hydrogen peroxide or optical brighteners), fabric softeners or strong fragrances as these will inhibit absorption. See our Detergent Disclaimer.

Detergent Dosing

The practice of low detergent dosing is something that has been promoted by some cloth diaper manufacturers who don't understand how water, detergent, and textiles interact in the wash. There is no good reason for low dosing, it's simply a bad practice.

When detergent and water hardness are mismatched, several things happen to the fabrics as they are trying to wash. First, the fabrics never get the proper cleansing they need, so both cleaning and rinsing are compromised. When you use the wrong detergents, soils, detergent residue, and minerals build up on fabrics. Low dosing slows down the buildup of detergent residues, but not the others - so over time, your diapers accumulate unwanted buildup of soils and minerals that make them hard to use. It's common to see a reduction in absorbency, odor problems, and sometimes increases in skin irritation.

If you're using the right detergent for your water, regular doses maximize cleansing, sanitizing, and rinsing. Low dosing reduces cleansing and rinsing, so your diapers will eventually accumulate those unwanted soils, residues, and minerals.

Special Situations and Remedial Actions

Stripping:

Stripping is a process that removes buildup and residues from fabrics. If you have a good wash routine and you have matched your detergent to your water hardness you should never need to strip a cloth diaper. If you're low dosing, using essential oils or fabric softeners, or boutique brand detergents in hard water, stripping is inevitable!

Stripping is best done in 2 stages, the first to remove residues and hardened soils, the second to remove mineral buildup.

Stage 1: Remove residues. Pre-soak your cloth diapers for 45 minutes in a laundry tub/sink using hot water mixed with 1/8 cup of good grease cutting dishwasher detergent (Dawn). Now send your diaper to the washer, wash HOT without using detergent, double rinse. Do not dry.

Stage 2: Removing minerals: There are a few options for removing minerals. You can use off the shelf demineralizers like CLR or simpler solutions like vinegar (acetic acid) or lemon juice (citric acid). In either case, you're adding a slight acid to dissolve minerals. Add 1 cup of CLR together with a half load size (top load washing machine) or mix together in your laundry sink. If using vinegar or citric acid, you'll need 4-8 cups per load. Let your diaper soak in this solution for an hour, then send them for another detergent free wash cycle, again doubling the rinse at the end.

Tumble dry on warm. 

Your cloth diapers should be good after this process. If you detect any residual small from the detergents, CLR, vinegar etc, run them through a regular wash cycle. 

Persistent Odor

Persistent odors are a result of a problem with your washing regimen - most often low dosing is the reason. If you have this problem it's recommended that you disinfect and sanitize all your cloth diapers, pails, and wet bags at the same time. You need to do 2 things when you face this issue: 1) fix the immediate problem and 2) review and fix your wash routine.

If your cloth diapers smell like a gym bag, you need a better wash routine. Often these bacteria get ‘hardened’, meaning they need an extra shock to remove them. To fix this problem you can use chlorine bleach (North American chlorine bleach - USA/CDN) or any good fabric safe sanitizer and the right dose of detergent!

If your cloth diapers have ammonia or barn-smell, its likely poop residue is left in your diapers after washing. This is more likely to happen to diapers that have a napped lining (Sherpa, fleece, suede cloth) than diapers with a smooth lining (pique, jersey, flannel). It’s also more common for dry pail users as dried solids are harder to cleanse. You can fix this by washing 2 times using a long hot pre-soak, hot wash followed by a warm tumble dry. Be sure to use the right dose of detergent!

Be sure to sanitize your diaper pail and wet bags as they hold the same bacteria and will quickly transfer them back to your diapers.

Conclusion

Spending a little time researching your water and detergent choices will make cleaning diapers easy, and should eliminate sanitary, maintenance and odor issues.

If your cloth diapers need periodic stripping or treatment for persistent odor, consider that an indicator you need to address a problem with your wash routine.

If you’re one of the 90% that has hard water, use brand name detergents with builders and softeners. They will get your diapers cleaner and may eliminate the need for stripping altogether. If you have soft water, you have more choices; use the brand you like best!

Use the recommended dose of detergent. Not only will your cloth diapers get cleansed more completely, using the right dose eliminates buildup that leads to trouble.

This article has been moved from our MEZ Forum into our blog for parents to use as a learning resource. The original publication date is Wednesday, September 26, 2012

 

Comments

  • Hello Kristen!

    Thank you for your question.

    If your water is soft, there’s nothing special you need to do and your detergent should work fine.

    Wash routine is easy, just make sure you’re using HOT water, a good quality detergent (that does not contain any oxygenated bleaching agents such as hydrogen peroxide, optical brightners, etc.) and making sure you’re washing at least every other day.

    Rinsing night time diapers out in the sink before storing for wash is also a good idea as they tend to be fully saturated with urine.

    Mother ease Cloth Diapers on

  • Hello Kate!

    Thank you for your questions.

    We do not sell pocket diapers, so I cannot speak to how you should care for your Pocket Covers. You will need to ask the manufacturer to be sure.

    For our covers, you can wash and store them the same way you would your diapers/inserts. If you’re pre-soaking your diapers, your covers can soak with them.

    With your washing machine, is it so old that you just turn the knob to the cycle you wish to use? If that’s the case, then you can just turn the knob all the way to the rinse part of the cycle and start there for a just rinse.

    You can use Borax or Calgon, either will work.

    Mother ease Cloth Diapers on

  • tested my water & got 75 (soft). I have tide original powder & Kirkland signature free & clear liquid. Would either of these work with my water? If not, I’ll use all free & clear powder. Could you help me with a wash routine?

    Kristen on

  • Washing diapers:
    1. Do I need to pre-soak the PUL pocket covers? Should I keep the covers separate from the liners until wash day, and then wash all together?
    2. Rinsing the diapers: I have an old washing machine – that has a wash-spin-rinse-spin cycle for ‘regular’, ‘permanent press’, and ‘gentle’ laundry – nothing fancy, no just-rinse cycle. After the wash-spin part of the cycle and onto the rinse cycle, do I need to add water softener to the rinse cycle to combat the minerals the diapers are exposed to during the rinse cycle (yes, my water is hard!)? Water softener like Borax, washing soda or calgon (which is frightfully difficult to get, and on Amazon.is very expensive), or do I add more detergent – and that seems wrong since, I thought I was rinsing the detergent out of the diapers. If I need to add something – which is the recommended additive: detergent (I use Tide), borax, washing soda or Calgon?
    Thank you
    Kate

    Kate on

  • Hi Brandie!

    I would first check the ingredient list on your Tide powder to make sure it does not include sodium percarbonate, oxygen bleach or optical brighteners, as we ask to avoid the use of detergents containing these harsh bleaching agents. They are very harsh on our cover bindings and elastics as well as will break down natural fabrics (cotton/bamboo) when mixed with uric acid (urine).

    As for the amount of detergent you should use, we recommend using the full amount suggested on the container of your detergent :)

    Mother ease Cloth Diapers on

  • How much Tide (powder) should I use for my pre wash and for my main wash?

    Brandie on

  • Hi Kate:

    We recommend a pre-soak/pre-wash on all diapers, whether it’s just urine or also poop. Either way, the diapers are laden with bacteria, and the pre-soak/wash will help in laundering the diapers. At our house, we have an ancient washing machine that does not have the fancy pare-soak option, so we simply run our diapers through a short wash with HOT water and a little detergent, and then a regular wash with a full dose of detergent and HOT water.

    Wet pail is ideal as the diapers are then soaking while they wait. This is a good idea if you’ve noticed a smell in your diapers still after they’ve been washed. If you’re having a hard time getting rid of the ammonia smell, then using a wet pail may be beneficial for you. You can add a small amount of detergent to it if you’d like, but you can also use just water.

    A quick pre-rinse before putting into the dry pail is a good idea for overnight diapers, as they tend to be much more saturated than daytime diapers.

    Mother ease Cloth Diapers on

  • Is bamboo treated the same as hemp?

    Do all diapers need the 10-minute pre-soaking, before washing – even the ones with just urine? And, is the pre-soaking with hot water, and do I add detergent to the pre-soaking as well?

    Is one system better than the other – dry pail versus soaking diapers until they are washed? Again if diapers are soaked (not dry-pail) – do I add something to the pail? If using dry-pail, do I do a quick pre-rinsing to remove urine? (Obviously, I pre-rinse poop residue, once the baby is on solid food)

    Thanks for this very informative article.

    Kate on

  • Hi Stephanie!

    Are you using Mother ease diapers?

    We do not recommend the use of Charlie’s Soap as we have had far too many complaints from customers that it simply does not have enough cleaning strength to clean bacteria-laden cloth diapers.

    I would recommend doing a sanitize following our instructions in this blog here: https://mother-ease.com/blogs/bump-bottom-beyond/how-to-sanitize-your-cloth-diapers

    And then switch to a detergent that we do recommend (Tide Original, Tide Free and Gentle, Ivory Snow or Green Works by Clorox) going forward. You can add Borax to any of those detergents if you have hard water.

    Make sure you’re washing in HOT water as well, to kill the bacteria, and going no more than 2 days between washes. Ammonia also becomes very common as baby grows and their urine becomes more concentrated. You may find it helpful to rinse the diaper out after each use before storing in your pail between washes.

    I hope that helps!

    Mother ease Cloth Diapers on

  • Hi,
    We are having a horrible go of ammonia build up. I strip using the grovia bubbles, but it just keeps coming back. I recently reazlied we have hard water (duh!). My question to you is do you think I should continue using Charlie’s and add a softener like Borax or Calgon or should I switch to a main brand like Tide? Also, should I just go ahead and strip my whole stash (again) or can I start with a new wash routine and go from there?

    Stephanie on

Leave a comment

* Required fields

Please note: comments must be approved before they are published.